Tips For Replacing a Window Handle
The replacement of the handle on your window is a simple task that can be accomplished in the at-home comforts of your home. Follow these guidelines to ensure an elegant and smooth finish.
Remove the screw covers from your uPVC handle to expose the screws. Then, measure the length of the spindle to ensure that you receive the right size replacement.
1. Measure the Spindle length
When you're replacing a window handle it's important to determine the dimensions of the spindle correct. It could affect the tightness or looseness of the handle, as well as whether the handle will lock correctly into the frame of the window. The spindle is a metal shaft that connects the handle to the lock on the window frame. The spindle is either an industry standard cross-section of 8mm or the earlier 9mm versions. The modern industry standard is 8mm however this was not always the case, so when purchasing a new handle, it's essential to check the dimensions.
www.repairmywindowsanddoors.co.uk to determine the length of the spindle is to remove the handle that is currently in place This can be accomplished by turning it into the open position, then unscrewing the two screws (which might be hidden behind plastic caps that will need to be removed) that retain the handle. After removal, take a measurement from the base of the handle until the end of the spindle. This will give you the measurement required to buy a replacement.
There are a variety of options when it comes time to choose the right window handle. From sleek chrome that fits into modern homes to traditional burnished bronze that looks great in restored Georgian rooms, or even the more traditional Tudor cottages with curled mongoose-tail latches. The possibilities are endless, but the most important thing is to choose a style that complements your home.
Espag handles are typically fitted to uPVC window frames and are always the exact same size with a 43mm center. Cockspur handles are available in a variety of sizes, ranging from 58mm to 62mm. Window handles made of Cadenza are different in size since they have an angled blade which operates with a multi-point locking mechanism within the window.
Another factor when choosing a new window handle is knowing which hand you require, this is simply defined by the hand you use to open the door. Inline window handles aren't hand-operated and can be used on either left or right handed windows. Cranked window handles are only compatible on windows that are open in one direction.
2. Take the handle off
The handle may be damaged or worn out the handle of a window that falls off is a major source of frustration. The good part is that replacing a uPVC window handle is a straightforward job that you can do yourself. All you require is the most basic tools and a bit of time to complete the process.
First, you must open the window and make sure it's not locked. The next step is to remove the screw caps that hold the handle in place. After the screw caps are removed you will be able remove the handle.
The handle itself is attached to a spindle within the window frame. The handle is fixed by either a screw or pin, depending on the type of handle. The most commonly used handles are the inline Espagnolette and cockspur handles. Both these types of handles are employed on casement windows, including aluminium windows. They can be locked by using keys to prevent the opening of the window from outside, or you can lock them by turning the handle clockwise.
To remove the handle you will require a flat-bladed screwdriver. After the clip has been released, the handle should be able to slide off the spindle. Once the handle that was previously used has been removed, you'll need to determine the length of the spindle and make sure that the new handle will fit.
Once you have the right size, you can screw the new handle in the correct position. It is important to make sure that the new handle is securely fixed and is turning in the correct direction (clockwise for open or counterclockwise for closed). It is crucial to make sure that the handle has not been installed upside down.
Finally, you should replace the screw cap caps. After you've done that then you can test the handle to confirm that it functions correctly. Also, you should test the locking mechanism by moving the handle until it is locked position and then back again.
3. Remove the Screws
A uPVC handle is an important component of any house and is the first thing that shows signs of wear or damage. This could be due to natural factors or through regular use and sometimes even intentional damage caused by criminals who may seek to open a closed window to gain access to your home. But, a simple fix is a simple solution and stop the issue from occurring again.
UPVC handles can also be difficult to remove if the locking mechanisms are not working correctly. It is often possible to fix the issue by replacing the multipoint locking mechanism, rather than the entire handle. This could help you save money.
After you've removed the old handle you'll need to take off the screws that were fixing it to the base. They are usually located on the inside of the handle base. You may require an screwdriver to do this, and it's important that you don't over tighten the screw as this could cause the handle to become loose.
Then, you'll have to find the screws or pins that keep the handle in place. These are usually located on the inside of the base of the handle. You'll require a screwdriver to remove them. After you have removed them, you'll be required to replace the caps on screws in the event that you want to do so and test the new handle to ensure it's functioning properly.
If you're ready to put in the new handle, simply align the spindle with the cut-out in the window mechanism and screw in the right position. If you wish to replace the screws make sure that the handle is in a slack position and that the screws are securely secured. You're done! Now you can enjoy the newly installed window handle. This will hopefully help you avoid expensive window and door replacements in the near future. Contact us if you require more information about this or any other aspect of your uPVC window.
4. Fit the New Handle
Whether you're replacing a broken handle or simply making it more modern the process is simple and can be completed in just a few steps. Identifying the type of window handle, determining its spindle length, and knowing the tools you'll require to finish the job are crucial. Always prioritise the safety of your windows and tools. Be sure to follow the steps and ensure that you have an appropriate handle for use.
The first step is to identify the screws that hold your existing window handle and take them out, while maintaining an adequate grip on the handle itself to stop it from falling suddenly and result in injury. Once the screws have been removed, they can be placed in a safe place to be replaced in the future.
After the handle that was used previously is removed, you can begin to fit your new one. It is crucial that the handle fits perfectly to ensure that it works properly and locks the window in position. Next you need to slide the metal bar that is square on the handle into the hole for the window mechanism.
Now that your new handle is in place, the last thing to do is to replace the caps on the screws and verify that it functions. If you are not satisfied with the result or the window doesn't shut or open properly, call our experts for help.
Almost all UK homes are equipped with uPVC Windows. As such, many will require replacement at some point because of damage or wear. The process is relatively straightforward and can be completed by anyone with a little experience in DIY. The most important aspect in the success of this procedure is making sure you're using a replacement handle that matches the existing window in terms of size and design. If you're not sure what type of handle you need, feel free to contact our team who can guide you through the possibilities available.